Tile, vinyl tile, old floors

Can You Put Epoxy Over Tile? Why We Take It Up First

Short answer: no, not if you want the floor to last. We never coat over ceramic tile or vinyl tile. The grout lines show through, the glaze won't hold the coating, and any loose tile underneath cracks the new floor above it.

So we take the tile and the thinset or glue off, grind the concrete clean, and put the new floor on the slab itself. It's one extra line on the quote and usually up to a day more on site. We do it in garages, basements, kitchens and stores across Oakville, Burlington, Mississauga, Etobicoke and Toronto.

Call (647) 284-6202

Why a coating over tile fails

  • Grout lines show through. A coating follows the surface under it, so every grout line, chipped edge and uneven tile shows up in the new floor.
  • The glaze doesn't hold. Glazed tile is made so nothing sticks to it. A coating on glaze can lift off in sheets.
  • The floor is only as strong as the weakest tile. Hollow or cracked tiles and loose thinset let go under traffic, and the coating above them cracks.
  • Vinyl tile is soft. Vinyl tile and its glue move. A hard coating on a soft base cracks and lifts at the seams.
  • Basements need the moisture barrier on the concrete. Every indoor floor we install starts with a moisture barrier, and it has to bond to the slab, not to tile sitting on top of it.

What we do instead, step by step

1

Check what's on the floor

On the visit (or from your photos) we look at the tile type, how many layers there are and how old it is. Old vinyl tile (often 9″ squares) or black glue from before about 1990 can contain asbestos, so nothing gets ground until a lab test comes back clean.

2

Tile and thinset or glue out

We chip the tile out, scrape off the thinset or glue and haul it all away. Ceramic is heavy, so a big room needs a bin, and that's on the quote too.

3

Grind the concrete

We grind the slab down to clean, open concrete with dust-extracting grinders and HEPA vacuums, and seal the room off first, because edge work still makes some dust.

4

Fix what the tile was hiding

Cracks get filled and ground flush. If the slab under the tile is badly rough or low, levelling is quoted separately so you see it before we start.

5

Put the new floor down

Garages get our full polyaspartic flake system. Basements and indoor rooms get the moisture barrier, an epoxy base and flake or a solid colour, with a polyaspartic top coat over flake.

Our tile-out job

Tile to Flake: Long Garage Floor in Mississauga

Mississauga · Sep 2026 · 200 sq ft

See the full job →
Finished full-flake epoxy floor in a long Mississauga garage, wall to wall
Mississauga garage before epoxy: half old white tile, half green-painted slab
⇆
BeforeAfter

Half the garage was covered in old white tile and the other half in worn green floor paint with tile marks. Under the tile, a long crack ran down the middle of the slab.

How we did that Mississauga garage

We chipped out all the tile and ground the whole slab to clean concrete. The crack was filled and ground flush, then a pigmented base coat, a full broadcast of flake and a clear polyaspartic top coat. One continuous floor from the garage door to the French doors, with no tile lines. Done in two days.

What's on your floor, and what we do with it

On the floor nowWhat we doWatch for
Ceramic or porcelain tileTile and thinset out, then grindHeavy to haul; the slab under it is often rough or low in spots
Vinyl tileTile and glue out, then grindOld 9″ tiles or black glue from before about 1990: lab test first
Vinyl plank or sheet vinylPulled up, any glue ground offGlued planks take longer than floating ones
CarpetPulled up, glue ground offTack strips and staples come out too
Old paint or peeling epoxyGround offThick old coatings take longer to grind

Kitchens, restaurants and stores with tile

Old tile is the most common floor we find in small restaurants, take-out kitchens and corner stores. The tile comes out the same way. What goes down after it depends on what the floor has to survive.

A busy kitchen with hot-water washdowns every night needs 1/4″ urethane cement, quoted per job. A store or a lighter kitchen does well with a flake or solid floor and an anti-slip top coat. Coolers and counters that can't move stay, and we cut a clean edge at their base. More on restaurant kitchen floors and which floor coating fits which space.

What it costs

Taking the tile up is its own line on the quote, priced by the kind of tile and the size of the room, so you see exactly what it adds. If your own crew takes the tile and thinset out, we quote the floor only.

The floor itself: garages from $2,800 for a 2-car garage, basements and indoor rooms from $10/sq ft, commercial floors from $3.50/sq ft. Every floor is different; your exact price comes after we see photos or measure. Full numbers in our epoxy flooring cost guide.

Questions about epoxy over tile

Can you epoxy over ceramic tile if you grind the glaze off?

Grinding takes the glaze off, but the grout lines, hollow tiles and the thinset under them are still there, and they show through or crack the coating. We take the tile up so the floor sits on the concrete.

Can you put epoxy over vinyl tile?

No. Vinyl tile and its glue are soft and move, so a hard coating on top cracks at the seams. It comes up first. Old vinyl tile or black glue from before about 1990 gets a lab test for asbestos before anything is ground.

How much longer does the job take with tile?

Usually up to a day more on site, depending on the size of the room and the tile. Ceramic is slower to take up than vinyl.

Can I take the tile out myself to save money?

Yes. Take out the tile and the thinset or glue, and we quote the floor only and grind from there. If the tile is old vinyl or there's black glue, have it tested before you start.

Will my floor be lower without the tile?

A little, by the thickness of the tile and thinset. Where the new floor meets a doorway or another floor, we finish the edge with a metal strip if it needs one.

Is there a warranty on a floor where tile came out?

Yes, the same as any of our home floors: 5 years. The floor is bonded to the concrete, not to the old tile.

Keep reading

Tile floor you're done with?

Send us a few photos of the floor and the size of the room. We'll tell you what it takes to come up and what the new floor costs.

TextCall